I'm wondering if anyone is aware of a source for some unusual size tuning pin bushings. These have an extra small hole in them, about the diameter of a hammer shank. In fact a hammer shank will fit perfectly snug in the hole. Most bushings have a 1/4" hole. I'm really not certain what piano would have pins small enough for these. I don't want them for a piano, I'm using them for organ pallet valve push rod stops and these are absolutely perfect for this application. I have a very limited supply of them and would like to find more as well as share some with another colleague who also does this kind of work. I don't know where the ones I have came from, they were in a box of miscellaneous piano parts purchased many years ago by someone else. Rob Goodale, RPT Las Vegas, NV -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091205/5c9d7ccd/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC