could a piece of shim stock be cut/trimmed to size. It should be fairly available. John Ross Windsor, Nova Scotia ----- Original Message ----- From: Steven Hopp To: pianotech at ptg.org Sent: Sunday, December 06, 2009 10:31 PM Subject: [pianotech] Agraffe Reduction Is there a method for reducting agraffe's without using the washers or the actual reducing tool. I only have one to do and need just a little material removed. If not I will order what is needed in the washers but would like to not have to wait for an order to come. Thanks in advance, Steven Hopp Midland, TX ------------------------------------------------------------------------------ Windows LiveT Hotmail is faster and more secure than ever. Learn more. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091206/978dd627/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC