In a pinch I've used balance rail punchings. The hole in the punching is too small for the stem of the agraff, but you can still get it to fill in the hole. Willem (Wim) Blees, RPT Piano Tuner/Technician 94-505 Kealakaa Str. Mililani, Oahu, HI 96789 808-349-2943 www.Bleespiano.com Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Steven Hopp <hoppsmusic at hotmail.com> To: pianotech at ptg.org Sent: Sun, Dec 6, 2009 4:31 pm Subject: [pianotech] Agraffe Reduction Is there a method for reducting agraffe's without using the washers or the actual reducing tool. I only have one to do and need just a little material removed. If not I will order what is needed in the washers but would like to not have to wait for an order to come. Thanks in advance, Steven Hopp Midland, TX Windows LiveT Hotmail is faster and more secure than ever. Learn more. = -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091207/62349625/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC