[pianotech] Agraffe Reduction

[Steven Hopp]

 Hello David,

 

I am removing material to facilitate alignment not to raise or lower the height of the agraffe.

 

Best wishes,

 

Steven Hopp

Midland, TX


From: davidlovepianos at comcast.net
To: pianotech at ptg.org
Date: Mon, 7 Dec 2009 06:59:06 -0800
Subject: Re: [pianotech] Agraffe Reduction







I meant if you “can’t remove a small amount…”
 

David Love
www.davidlovepianos.com
 


From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Love
Sent: Monday, December 07, 2009 6:57 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] Agraffe Reduction
 
Just curious.  What’s the issue that you have to remove just a small amount of material on only one agraffe?  Since washers and removing material change the height in opposite directions are you considering raising the level of all the other ones if you can remove a small amount of material from the one?
 
David Love
www.davidlovepianos.com
 


 
Is there a method for reducting agraffe's without using the washers or the actual reducing tool.  I only have one to do and need just a little material removed.  If not I will order what is needed in the washers but would like to not have to wait for an order to come.
 
Thanks in advance,
 
Steven Hopp
Midland, TX



Windows LiveT Hotmail is faster and more secure than ever. Learn more. =  		 	   		  
_________________________________________________________________
Windows Live Hotmail is faster and more secure than ever.
http://www.microsoft.com/windows/windowslive/hotmail_bl1/hotmail_bl1.aspx?ocid=PID23879::T:WLMTAGL:ON:WL:en-ww:WM_IMHM_1:092009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091207/b2bca638/attachment.htm>