[pianotech] hot box dimensions

[Ron Nossaman]

jiimialeggio wrote:
> I'm constructing my version 2 hot box.   What  is the  min  rough  
> rectangular interior dim (width and length of the rough board) I should 
> allow to fit  the largest beast of a soundboard I may encounter? 
> ...don't want to have to do this again later. 

Mine's 8' tall, 7' long, and 7" wide. Inside dimensions for 
the soundboards are 89-1/2" tall, 63-3/4" long, and 5-1/4" 
wide at the door. I figured it should accommodate anything up 
to 9'6". Anything bigger, I couldn't get in the shop anyway. 
So far so good.
Ron N