i wish i had known about this possibility BEFORE the price and work to be performed was agreed upon...grumble... On Wed, Dec 23, 2009 at 10:02 PM, Delwin D Fandrich <del at fandrichpiano.com>wrote: > Yes. > > > > It had negative string bearing and the strings were actually holding the > “crown” in the board. It (the board) was, needless to say, toast. > > > > ddf > > > > Delwin D Fandrich > > Piano Design & Fabrication > > 620 South Tower Avenue > > Centralia, Washington 98531 USA > > fandrich at pianobuilders.com > > Phone 360.736.7563 > > *From:* pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] *On > Behalf Of *Noah Frere > *Sent:* Wednesday, December 23, 2009 6:34 PM > *To:* pianotech at ptg.org > *Subject:* [pianotech] Reversing Crown > > > > Has anyone found a positive crown on a grand soundboard, then removed the > strings and the crown reversed? > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091223/40589637/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC