we heat the wire with a propane torch and push it to the bottom of the hole. Matthew Todd wrote: > When screwing on the new elbows, do we normally screw till the elbow > just covers the threads on the lifter wire, or do we screw until the > lifter wire is all the way down in the hole? > > OR, does it not matter? > > ***_TODD PIANO WORKS_* > Matthew Todd, Piano Technician > (979) 248-9578 > http://www.toddpianoworks.com <http://www.toddpianoworks.com/> >
This PTG archive page provided courtesy of Moy Piano Service, LLC