I am just double checking to make sure that checking for and, in essence, correcting lost motion is the same in spinets as it is in consoles and studios. i.e. to check for lost motion in spinets you can push your finger down on the back of the key and see if there is any movement in the backchecks, and make adjustments accordingly.......or by tugging on the hammer rail. TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090219/64aeaeea/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC