[pianotech] "pushing" bridge pins?

[Richard Brekne]

I think the case can easily be made that being able to push bridge pins 
in by hand is a good thing. First fill the hole up with your favorite 
epoxy or CA solution... slowly push in the pin, wipe off excess... and 
you have as tight an all around fit as is possible to get. Quite quickly 
as well.

Cheers
RicB

    If you can push in a bridge pin with your hand, it would not only be
    loose(r), but too loose, IMO.
    Thanks for the clarification,

    Alan Eder