Hello Bruce, Have also found Excessive tightness of full sustain pedal Rod will cause lost motion problems. always check this first. Don Lemoine On Feb 20, 2009, at 11:22 PM, Bruce Dornfeld wrote: > It is always a good idea in vertical pianos that were not built to > the most exacting standards or with a lot of wear to check the jack > return on a number of test notes. Whether the hammer follows the > hammer rail back or not, if the jack does not get all the way back > into position, you need more lost motion. If you adjust everything > to the normal standard, then find out the piano won’t play, you will > have to do it over again. DAMHIK! > > Bruce Dornfeld > bdornfeld at earthlink.net > North Shore Chapter > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090221/c9a22c38/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC