[pianotech] Efficient non-destructive hammer removing?

[Ed Sutton]

Gentle heat to soften the glue.
es
  ----- Original Message ----- 
  From: jim ialeggio 
  To: pianotech at ptg.org 
  Sent: Monday, February 23, 2009 12:51 AM
  Subject: [pianotech] Efficient non-destructive hammer removing?


  List,

  Any suggestions on efficient methods for removing new hammers non-destructively, for fooling around with strike points, corrections, etc.

  Jim I

  -- 
  grandpianosolutions.com(under construction)
  Shirley, MA  (978) 425-9026
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090223/0b05c4f4/attachment.html>