> I'm replacing a wood bass top bridge on an old late 1890's upright (the > plate stops at the pinblock). The bridge split at the upper bass strings. > Not repairable in my opinion with either epoxy or CA. What wood would you > recommend using for the replacement? Delignit, pinned and epoxy impregnated. >Any suggestions on removal and > installation of new bridge. Proceed according to what you find when you start. Avoid explosives, if possible. Glue and screw the replacement on, however the original was mounted. > Marc Lanthier Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC