That's what I do also. Pumps work great for dispensing. In fact, I keep my gram scale on my glue bench under the epoxy pumps, ready to go. Al -------------------------------------------------- From: "Farrell" <mfarrel2 at tampabay.rr.com> Sent: Thursday, February 26, 2009 8:06 PM To: <pianotech at ptg.org> Subject: Re: [pianotech] Bass Top Bridge > I agree with you completely Mike regarding weighing the ratio of resin & > hardener - only way to do it accurately. However, the pumps only cost a > few bucks and they make dispensing the stuff a whole lot easier - super > easy to drip out less than a half-gram liquid at a time - the controlled > dispensing makes the weighing process very easy and accurate. > > My 2 cents worth. > > Terry Farrell > > ----- Original Message ----- > From: "Mike Spalding" >> One more thing - Don't buy the pumps, spend the money instead on a small >> digital scale so you can mix by weight. It's much more accurate, and you >> can make really small batches. >> Mike > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC