[pianotech] Erwins key dip gauge

[pianolady50 at peoplepc.com]

These must be a years ago knock-off from your dad's, Dale.  A local (SWFL) chapter member made them (before I was a tech).  Got these, and several others that I gave away, when I bought out the remnants of Ed Wood's shop.  (Ed probably made them)

Debbie L.
  ----- Original Message ----- 
  From: erwinspiano at aol.com 
  To: pianotech at ptg.org ; Erwinspiano at aol.com 
  Sent: Friday, February 27, 2009 12:09 AM
  Subject: [pianotech] Erwins key dip gauge




    Hi All
    I've put this off for along time & others thought I should post this.
    Ok, true confessions. I've never set key dip with a dip block. I found them difficult to read but that's me. I'm sure many have used them successfully.
    For 36 years I have used a simple gauge designed by my Dad. It is a .370 dia rod attached to an 1/8 th inch handle. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/a6f3f156/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMAG1107.JPG
Type: image/jpeg
Size: 154466 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/a6f3f156/attachment-0001.jpe>