Ric, This is how I do it as well. Even with metric! <g> Regulaltion is a circle of refinement. Paul Richard Brekne <ricb at pianostemmer.no> Sent by: pianotech-bounces at ptg.org 02/27/2009 09:09 AM Please respond to pianotech at ptg.org To pianotech at ptg.org cc Subject Re: [pianotech] Fwd: Erwins key dip gauge I start with a rough 10 mm dip... go about as good a regulation as I can, then circle back to key dip for after touch, finishing with a refinement of drop as that can change with changes in key dip. Cheers RicB -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/e84e6597/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC