Dale, http://www.metricmetal.com/products/round.htm Paul (I've never ordered from them) Bruesch On Sat, Feb 28, 2009 at 5:42 PM, <erwinspiano at aol.com> wrote: > *Jim > Metric brass is impossible to find I'm told. If I can find a source I'd > make new gauges with another piece of 10 mm on the other end.... or not. > By the way what is the standard equivalent of 10 mm exactly. Bet it's > slightly less than .390 > > * Dale > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090228/9270ce66/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC