On 1/15/09, B214cm at aol.com <B214cm at aol.com> wrote: > File the sides of your tool thinner. That will allow access. Or get a > Yamaha > style tool which will also work well. > > > In a message dated 1/15/2009 1:59:24 P.M. Eastern Standard Time, > hoppsmusic at hotmail.com writes: > > Hello all, > > I can not access any archives and I imagine this is a question that was > answered many times before so my apologies for repetition. I need to know > what > tool I need to align jacks to knuckles in a Baldwin Grand. I can't get to > them easily because of the dowels for drop regulation. Thanks for the > help. > > Steven Hopp > Along with a thinner shanked tool, you may have to trip/tip the jack in your direction (by pushing down on the fly/tender) to have the tool engage properly. -- Conrad Hoffsommer, RPT Luther College Decorah, IA
This PTG archive page provided courtesy of Moy Piano Service, LLC