On Jan 15, 2009, at 12:00, Patrick Draine wrote: > ...Maybe Jurgen G or Joe G has something with an even thinner shaft. > Patrick Draine I carry two varieties: one with a barrel head and one with an even more slender tip. The barrel head has the advantage that is ti self-finding - just stick it onto the end of the adjustment screw and turn, it will slip onto the screw. The slender tip will fit in between most closely spaced let-off dowel capstans. BTW, the ruler below is metric, i.e. the slender tip is about 2.8 mm thick , that is around .115" Jurgen Goering Piano Forte Supply (250) 754-2440 info at pianofortesupply.com http://www.pianofortesupply.com -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 717 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090115/b79812c1/attachment-0002.bin> -------------- next part -------------- A non-text attachment was scrubbed... Name: Reg-screwdr.-2.a.jpg Type: image/jpeg Size: 5004 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090115/b79812c1/attachment-0002.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: Reg.screwdr.3.aa.jpg Type: image/jpeg Size: 7561 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090115/b79812c1/attachment-0003.jpg> -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 4 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090115/b79812c1/attachment-0003.bin>
This PTG archive page provided courtesy of Moy Piano Service, LLC