I went to service an old player upright today. There are two broken hammer shanks, which I took with me. This will be my first go at angle boring, since one of the hammers is in the bass. I should have everything to do this project, but could I get some e-mails on some suggestions, etc? Thanks a lot! TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090121/f0aac384/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC