[pianotech] bridle wires

[Gerald Groot]

I've used a tiny dab of glue as Ryan suggests too with great results many
years later.. 

-----Original Message----- 
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of David Nereson 
Sent: Wednesday, July 01, 2009 4:52 PM 
To: pianotech at ptg.org 
Subject: [pianotech] bridle wires 

    Has anybody replaced the "stupid"-type bridle wires (where 
the strap can slide down the wire if the hole in the tab gets 
enlarged) on some Baldwin verticals with "real" bridle wires? 
What's an efficient way of pushing the new ones in (into the 
same wippens)?  The new wires have fluted, not threaded ends. 
I'm wondering if it can be done without unscrewing all the 
wippens from the action. 
    --David Nereson, RPT 



  _____  

avast! Antivirus <http://www.avast.com> : Outbound message clean. 


Virus Database (VPS): 090701-0, 07/01/2009
Tested on: 7/1/2009 10:32:43 PM
avast! - copyright (c) 1988-2009 ALWIL Software.