OK, I’ll take a look at the tray again. Thank you. Laura From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of wimblees at aol.com Sent: Saturday, June 13, 2009 3:33 PM To: pianotech at ptg.org Subject: Re: [pianotech] Ringing on Laura In addition to regulating each individual damper, did you check that all the dampers are adjusted properly on the damper lifter tray. It sounds like perhaps some of the dampers might not have enough follow through, (They're just barely sitting on the strings). and what you're hearing is a sympathetic vibration coming from a note an octave or octave and a fifth below the note you're trying to dampen. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Laura Read <lauraread at earthlink.net> To: pianotech at ptg.org Sent: Sat, Jun 13, 2009 3:44 am Subject: [pianotech] Ringing on I am working on an old Haines Bros. 5’ grand with lots of issues, including significant cracks in the soundboard, but I don’t have a clue why the sound is ringing on. I have regulated the dampers, which apparently were replaced a few years back, but even when I put my hand down on the strings I can’t stop the sound. Any ideas? Thank you, Laura _____ Make your summer sizzle with <http://food.aol.com/grilling?ncid=emlcntusfood00000003> fast and easy recipes for the grill. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090613/8518486b/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC