[pianotech] angled drop screws on Lester grand

[KeyKat88 at aol.com]

Greetings, 
 
          When replacing shanks, flanges and hammers on a 5'-0" Lester gr
and, if  the drop screws on the original flanges are set at an angle, can the 
new flanges have drop screws that are  the standard straight type with no 
angle be acceptable as replacements or would it be better to repin all the old 
flanges to the new shanks? 
           Is there anything to consider with the regulation of straight 
ones?  I am told that the only flange replacements available are non-angled 
ones. 
Comments/suggestions?  
 
Thanks,
Julia Gottshall
Reading, PA
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy 
Steps! 
(http://pr.atwola.com/promoclk/100126575x1221823265x1201398681/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jun
eExcfooterNO62)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090616/d491ff0c/attachment.htm>