[pianotech] reamer for damper lever top flange

[William Truitt]

That's the size differential that I have used for umpteen years with good
success.

Will Truitt

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of A440A at aol.com
Sent: Friday, June 19, 2009 8:38 AM
To: pianotech at ptg.org
Subject: Re: [pianotech] reamer for damper lever top flange

 
<< So what size

drill bit is appropriate for me to use for this 1922 S&S O, oh damper 
gurus? >>

    Maybe .004" larger than the wires.  



Ed Foote RPT 
http://www.uk-piano.org/edfoote/index.html
www.uk-piano.org/edfoote/well_tempered_piano.html
 <BR><BR><BR>**************<BR>Dell Inspiron 15: Now starting at $349 
(http://pr.atwola.com/promoclk/100126575x1222435718x1201460505/aol?redir=htt
p:%2F%
2Fad.doubleclick.net%2Fclk%3B215748553%3B38126199%3Bs)</HTML>