Some center pins are walking out of the damper flanges and hammer flanges. The double flange with hammer and damper attached cannot be removed because the sustenuto rod is in the way. The stickers are attached to the keys with a "mystery" material, glued to the sticker and clamped to the key stick. What material should I use to repair/replace this connecter? The customer knows the challenges with this instrument and is willing to make repairs and service to keep it working. The case has been restored, but nothing much has been done to the action. It's the oldest working piano I've seen that is still being played. Paul C -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090302/4aa17801/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC