[pianotech] Epoxy

[Clark Sprague]

Thanks, Del!  I saw the coating epoxy in their product sheets, but the store didn't have it in stock, and I guess I didn't know that there would be that big of a difference.  I will read your articles, and know better the next time.  Thanks again.

Clark Sprague
  ----- Original Message ----- 
  From: Delwin D Fandrich 
  To: pianotech at ptg.org 
  Sent: Saturday, March 07, 2009 6:15 PM
  Subject: Re: [pianotech] Epoxy


  Go back and read the original articles. In there I discussed using System Three coating epoxy. It's a whole other kettle of stuff. Much thinner and slower than their normal resin. Thinner and slower than WEST System as well. Another alternative is MAS epoxy resin with their very slow hardener. The stuff is a little on the thick side but cures so slowly it penetrates quite well.

  ddf


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090307/7c912385/attachment.html>