[pianotech] young chang status

Dave Davis dave at davispiano.com
Sun Mar 22 10:11:40 PDT 2009


I heard the newly re-designed grands were well received at NAMM. I hope they will make the effort to take some to Grand Rapids in July.

Dave Davis, RPT



________________________________
From: Delwin D Fandrich <del at fandrichpiano.com>
To: pianotech at ptg.org
Sent: Saturday, March 21, 2009 3:29:07 PM
Subject: Re: [pianotech] young chang status


As far as I know the company is sound. Yes, there was some floundering around just before, during and after the Samick fiasco but since being purchased by Hyundai things have been improving. I would guess production is down just now as it is for most piano makers but, since their largest market is in Asia I don't know how the economic mess over here has affected them.
 
A lot of money has been poured into the factories. There is a smaller factory in Inchon, Korea and a larger one in Tianjin, China. There is also a recently renovated iron foundry near Tianjin where they are vacuum casting all of the plates for the smaller pianos and sand-casting the plates for the larger grands. They also do some casting for other piano makers.
 
The company has been working through the designs of their three largest grands, a couple of their verticals and plans are being made (last I heard) to tackle their smaller grands.
 
ddf
Delwin D Fandrich
Piano Design & Manufacturing Consultant
620 South Tower Avenue
Centralia, Washington 98531  USA
Phone  360.736.7563
Cell  360.388.6525
Fax  360.736.5239
E-mail 1: del at fandrichpiano.com
E-mail 2: ddfandrich at gmail.com
________________________________

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Tom Driscoll
Sent: March 21, 2009 6:07 AM
To: Pianotech
Subject: [pianotech] young chang status

 
To all of Newtonville,
Anybody know the status of Young Chang?
 A friend was approached about picking up the line and I remember something about bankruptcy mentioned afew years ago. 
Has that been resolved--Where are they made and by whom? 
Inquiring minds -----
Respond off list if you would prefer.
tomtuner at verizon.net
Thanks,
Tom Driscoll
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090322/a49641e0/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC