[pianotech] agraffe leveling

[paul bruesch]

Business card would be about .010" and paper .003" (i.e. ten thousandths and
three thousandths... you had one thousandth [ten ten-thousandths] and three
ten-thousandths). Hence half those numbers would correctly be .005" and
.0015"

Paul Bruesch (former machinist geek)
Stillwater, MN


On Fri, Mar 27, 2009 at 11:22 PM, Joe And Penny Goss <imatunr at srvinet.com>wrote:
<snip>

> Business card about .0010"  paper .0003"
> So taking a little liberty with these measurments and knowing that the foot
> rests on only about half its width, one is trying to level the strings to a
> very narrow target of less than .00005 to .0001"
>
</snip>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090328/46a11830/attachment.html>