Peter Nehlsen in Wisconsin (RPT in the Appleton, WI chapter) makes action parts. He's very good, and pretty quick. Paul In a message dated 5/1/2009 12:15:56 P.M. Central Daylight Time, rnossaman at cox.net writes: Rex Roseman wrote: > Jeff > > Unfortunately this does not have the standard rail. It is a flat rail with a > small square alignment rail on top, a precursor to the metal rods that some > of the action makers use to keep flanges lined up. The other problem is the > distance between the bushing holes is less than in the current double > flanges from Steinway. > > Rex Roseman Make 'em, or get someone else to. It shouldn't be particularly difficult, just time consuming. Ron N **************Access 350+ FREE radio stations anytime from anywhere on the web. Get the Radio Toolbar! (http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090501/5608a622/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC