Matthew, Capstans. Debbie L. I went to tune a clients piano today. It is a Kawai Console, year 1986. The very first thing I noticed was the hammer line was totally screwed up. Some of the hammers were resting on the rail, and others were off the rail. I unscrewed the action bracket nuts and pulled the action back a little until all the hammers were resting on the rail. I will be going to do some voicing tomorrow, but pointed this out to the client as a need to fix, so I will be doing that as well. What issue might this be? What could I go to first to see if that is the problem? Thanks, TODD PIANO WORKS -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090506/af93e76a/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC