[pianotech] DamppChaser problem

William Monroe bill at a440piano.net
Wed May 20 19:37:23 MDT 2009


Not "only," Paul.  As Dean mentioned, they can be fitted to old style
humidifier rods, and can be slit and placed under the wires of the
"less-old" SHB.  Just cut the length of it, and slide it in under the SHB
wires, leaving the cut end facing down.  Works well.

William R. Monroe

On Tue, May 19, 2009 at 7:40 PM, paul bruesch <paul at bruesch.net> wrote:

> Those are only for use with the new "Smart Bracket". They slide on the
> humidifier bar, then the Smart Bracket is clipped over it. The pads must
> contact the metal contacts or the "Pads" light will never turn off.
>
> Paul Bruesch
> Stillwater, MN
>
> On Tue, May 19, 2009 at 7:37 PM, Floyd Gadd <fg at floydgadd.com> wrote:
>>
>> The lastest box of damppchaser pads I received included a bag of
>> disposable
>> plastic sleeves to slide over the humidifer rod.  I would imagine that if
>> these are in use, further damage to the existing rods would be unlikely,
>> and
>> changing them would be unnecessary.
>>
>> I've never seen these sleeves before.  It must be something new, unless
>> they
>> were  in previous boxes of pads, and I simply overlooked them.
>>
>> Floyd Gadd
>> Manitoba Chapter
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090520/4afdcb95/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC