Hi John Ok, I hear the voice of experience speaking, so give us a bit of the protocol and the learning curve as well as the plus side & the other side...if there is one. Thanks Dale -----Original Message----- From: Jon Page <jonpage at comcast.net> To: pianotech at ptg.org Sent: Sat, Nov 7, 2009 9:34 am Subject: Re: [pianotech] Foredom mini belt sander for hammer filing -sandingbelts >Can the Wahl sander/filer be used on upright hammers with the dampers in place? Yes, with the action removed. :-) -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091107/34d12d52/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC