"G'==GARRET ,joe Garret On Nov 7, 2009, at 6:39 PM, Peter Poole wrote: > the "G" list! that 's what I was trying to remember the name of! > thanks. > > > Best, Peter > > Peter Poole > ppoole at metrocast.net > > > > On Nov 7, 2009, at 7:12 PM, Jim Busby wrote: > >> Peter, >> >> That's safe for me, (3) but the "G List" says 5 hours for a set. >> >> Jim >> >> -----Original Message----- >> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] >> On Behalf Of Jim Busby >> Sent: Saturday, November 07, 2009 5:09 PM >> To: pianotech at ptg.org >> Subject: Re: [pianotech] time to do new flanges >> >> 3 hours. >> >> JB >> >> -----Original Message----- >> From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] >> On Behalf Of Peter Poole >> Sent: Saturday, November 07, 2009 4:49 PM >> To: Pianotech List >> Subject: [pianotech] time to do new flanges >> >> >> Quick ? how long should I estimate to replace all 88 hammer flanges >> on >> a Steinway S; not including traveling. >> >> >> thanks, Peter >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC