Chuck, the Pianotek tool is the best way to go. The only problem is that if you buy it, you'll probably never get to do another set. But on the other hand, if you don't buy it, you'll get 2 more sets to do before the year is out.<G> "My Law" Al From: Chuck Behm Sent: Tuesday, November 10, 2009 2:29 PM To: pianotech at ptg.org Subject: [pianotech] Center rail pins List - What would be the best ordinary shop tool to use to remove an entire set of center rail pins - I've removed individual pins before, but I'm sure there must be a more efficient way than what I tried. Also, putting in the new ones? Any suggestions would be appreciated. Chuck Behm -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091110/ae5fc4a5/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC