Hi Chuck, You might not have these in the shop, but they might do the trick. Probably work for bridge pins and backchecks too. http://www.leevalley.com/hardware/page.aspx?c=2&p=63397&cat=3,41306,41331 William R. Monroe On Tue, Nov 10, 2009 at 1:29 PM, Chuck Behm <behmpiano at gmail.com> wrote: > List - What would be the best ordinary shop tool to use to remove an entire > set of center rail pins - I've removed individual pins before, but I'm sure > there must be a more efficient way than what I tried. Also, putting in the > new ones? Any suggestions would be appreciated. Chuck Behm > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091111/2dd21bae/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC