It's a little tricky, but you can put a couple of drops of super glue on a scredriver blade, and apply it to the tray. Then "kick" it, and put the flange down. Use a wider a blade to put pressure between the flange and the belly rail. Wim -----Original Message----- From: David Nereson <da88ve at gmail.com> To: pianotech at ptg.org Sent: Fri, Nov 20, 2009 1:18 am Subject: [pianotech] S&S glued underlever flanges I know there's probably an archive thread on this, but I have problems finding stuff in the archives. On those old Steinways where the damper flanges are glued to the back action rail (no flange screws): when they come loose, is the only option to remove all the dampers, pull out the back action, and and re-glue them all? --David Nereson, RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091120/62d83405/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC