I suppose, now that your retired we'll be hearing more from you... '-] David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Conrad Hoffsommer" <choffsommer at hotmail.com> To: pianotech at ptg.org Received: 11/20/2009 4:13:06 AM Subject: Re: [pianotech] S&S glued underlever flanges >David, >How do you know if any/which of the others will fail? Take the underlever tray over >to your drill press and make some sawdust. Drill and fit screws in all, instead of >possibly tearing wood and certainly affecting alignment of the beasties by removing >and regluing. >my 2¢ >Conrad Hoffsommer >> From: da88ve at gmail.com >> To: pianotech at ptg.org >> Date: Fri, 20 Nov 2009 04:18:55 -0700 >> Subject: [pianotech] S&S glued underlever flanges >> >> I know there's probably an archive thread on this, but I >> have problems finding stuff in the archives. On those old >> Steinways where the damper flanges are glued to the back action >> rail (no flange screws): when they come loose, is the only >> option to remove all the dampers, pull out the back action, and >> and re-glue them all? >> --David Nereson, RPT >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC