That's what I was going to say. I wanted to shorten the shaft length of my Keith Bowman tuning lever, but that of course required new threads. I found a small local machine shop that did an A-1 job for me. Terry Farrell On Sep 3, 2009, at 2:13 AM, James Johnson wrote: > A good machinist should be able to guage the tread size and make > whatever you need, probably better quality than you could do yourself. > > ----- Original Message ----- From: "Jack Reisland" <reislandj001 at hawaii.rr.com > > > To: <pianotech at ptg.org> > Sent: Wednesday, September 02, 2009 8:39 PM > Subject: [pianotech] Tuning wrench tip threads? > > >> Does anyone know what size/ pitch the threads are in a standard >> tuning wrench tip? I am playing with making a wrench, and need to >> match it. >> >> Best Regards, Jack Reisland >> >> >> >> >
This PTG archive page provided courtesy of Moy Piano Service, LLC