Go with Ronsen hammers. Talk with Ray about what felt he recommends. Lots of info on that in the archives.
Al -
High Point, NC
From: Denis Kelly
Sent: Thursday, April 01, 2010 2:16 PM
To: pianotech at ptg.org
Subject: [pianotech] Hammers for small vintage Baldwin Grands
I have two Baldwin grands in the shop for rebuilding. As to hammers, I'm looking for a somewhat mellow sound. Previously I've used Brooks Encore hammers by Abel, but they were too bright. Ideally the hammers should be similar in weight to the originals, and not need a lot of voicing. Any suggestions?
Thanks,
Denis Kelly
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100401/d1ab1f6f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC