[pianotech] Pitch change, etc.

[Ron Nossaman]

William Truitt wrote:
> Thanks Ron for the referral, and others who have commented.  What are you
> using for an epoxy, and how much do you thin it to get the saturation?

Regular old West System, with a little high density filler to 
keep it from all running out onto the floor. It soaks clear 
through that thin veneer, no problem. Oh, and the veneer, it 
doesn't matter a bit if it's quarter or flat cut. There's more 
of the flat cut, and you have more choices.
Ron N