[pianotech] Slow drop fallboard hinge for YC

[Al Guecia/AlliedPianoCraft]

Thanks everyone for your very helpful input.

Al - 
High Point, NC
  From: Terry Farrell 
  Sent: Monday, April 26, 2010 4:11 PM
  To: pianotech at ptg.org 
  Subject: Re: [pianotech] Slow drop fallboard hinge for YC


  While I like Jurgens quite a bit, it did require some chiseling. If Kawai makes one for their pianos, you might want to look at that - just because the hinges are similar - maybe the Kawai unit would require less wood chopping. 


  I installed my Jurgen unit on an 1895 Knabe grand.


  Terry Farrell


  On Apr 26, 2010, at 2:51 PM, tnrwim at aol.com wrote:


    Al

    Kawai has them, (I had to replace one), but they are for their pianos, I don't know if they would work on a YC. You might want to give them a call. 

    Wim




    -----Original Message-----
    From: Al Guecia/AlliedPianoCraft <AlliedPianoCraft at hotmail.com>
    To: pianotech at ptg.org
    Sent: Mon, Apr 26, 2010 7:48 am
    Subject: Re: [pianotech] Slow drop fallboard hinge for YC


    I called YC and the person I spoke to (I think it was John Chang) said they don't have them in stock, nor do they sell them. Any ideas on how I can get a  slow drop fallboard hinge for a Young Chang G-150 would be greatly appreciated.

    Al - 
    High Point, NC
      From: Al Guecia/AlliedPianoCraft 
      Sent: Monday, April 26, 2010 12:50 PM
      To: Pianotech List 
      Subject: [pianotech] Slow drop fallboard hinge for YC


      I need a slow drop fallboard hinge for a Young Chang. Is this something you can only get directly from them?

      If so, does anyone have the number for their parts dept?

      Thanks,

      Al - 
      High Point, NC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100426/03d42c9c/attachment.htm>