There is a big problem. It has corfam and it is coming loose under the jacks. I'm thinking superglue. It has been roughed up, so they had some problem with it in the past. If I hadn't ordered hammers, I'd now recommend they scrap it. I can't afford to eat the cost of the hammers, yet don't want to cheat the customer either, so I'm at a loss. I'm sure the corfam parts can be super-glued quite easily. Les b -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Wednesday, August 11, 2010 5:54 AM To: pianotech at ptg.org Subject: Re: [pianotech] mold Do not overlook if there is Corfam on the butts. If it falls within '74-'84, change the butts also. -- Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC