Carlos Ralon wrote: > List, > Badly needed. I'm working on a 1930's small Knabe Grd. I need new > balance rail pins size > .150 x 2". Shaff only has .146 & .160 x 2 1/4 & 2 5/8 long. The .146 are > too small and the .160 much too big for the holes and especialy the keys. > Pianotech also no go on sizes according to their catalog. Anyone know of a > supplier with these sizes or help me with a solution. Thanks. > Carlos Ralon, RPT I have a pdf of a catalog from the Pianoteile site that lists 3.8x54mm key pins, which sounds just like what you've got. Otherwise, I'd shim in a set of 0.146" pins (drilled deeper as necessary), and size the balance hole and bushings to fit. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC