Lee I have had success super gluing the felt, using needle nose vice grips to hold the felt in place. Wim Sent from my HTC PURE, a Windows® phone from AT&T -----Original Message----- From: lee innocent <ljinno at googlemail.com> Sent: Tuesday, August 24, 2010 9:43 AM To: pianotech at ptg.org Subject: [pianotech] Loose hammer head felts. Hello list, I am currently repairing a bentley upright about 40yrs old and the hammer head felts on the bottom 15 hammers have started to come loose, some have come off completely. There are no rivets in the felt they have just been glued on. My question is what is the best method to glue/clamp them back on. Thanks Lee -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100824/f5764c72/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC