Rethinking trolleys for moving a piano around the shop during a full rebuild. Alright...this is the last time I make one of these...There are just too many rolling contrivances in my shop that are in between jobs, stacked up cluttering the place up. On the plus side, they get the piano at a comfortable height to do belly work, and they move around the shop like a charm. On the negative side, you gotta build the darn thing for each job, then disassemble it ( or trip over it till you get lucky and get a piano that's the same size). Also big on the negative side, is its really hard to do the dead lift necessary to get the piano up onto the trolley...no tilting to make life a little easier. So...what are the other options out there in the small one/two man shop out there?? Jim I Jim Ialeggio grandpianosolutions.com 978- 425-9026 Shirley, MA -------------- next part -------------- A non-text attachment was scrubbed... Name: P1030224.JPG Type: image/jpeg Size: 162344 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101208/3b412cc0/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC