Donn, 1. Fine file, followed by emery buffing compound. 2. Dremel with cutoff wheel. 3. Lacquer, either gold with clearcoat, or just clearcoat. Mike On 12/14/2010 8:29 AM, SooperTooner at aol.com wrote: > How does one go about rehab-ing screw heads? In particular: > 1 - Removing burrs and polishing the face to leave a flat surface > 2. Cleaning or re-cutting the slot. In fact, what kind of tool is used > to cut the slot in the first place? > 3. Has anyone experimenting with using DIY chrome plating kits? > Thanks for the help. > > Donn Young, RPT > 610-964-8181 > Devon, Pennsylvania > On the web at > www.FixPianos.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC