[pianotech] Brambach Action - was New (to me) action

[paul bruesch]

Thanks, Joe... that was my main question after determining the "name" of the
action...
Cheating test: palm an inch or so above hammers and smack the keys mf or f,
right?
Paul

On Wed, Dec 29, 2010 at 11:46 AM, Joseph Garrett
<joegarrett at earthlink.net>wrote:

>  Yikes! I've been reading some of the off the wall comments from y'all
> regarding this action! You'all must lay awake at night thinking up this
> nonsense, IMHO!!! The action regulates EXACTLY like any modern action! The
> only exception criteria is the alignment of the jack on the Hammer Butt, aka
> "knuckle"! The center line of the jack, should align with the vertical edge
> of the wood in the Hammer  Butt aka Knuckle. However, since the leather that
> covers the Hammer Butt does not form a perfect square corner, the "cheating"
> test is recommended on every note and adjust accordingly.
> Sheesh! Where do you dudes come up with this stuff! It totally amazes me,
> but then I'm easily amazed.<G>
> Regards,
> Joe
>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101229/2d07bac0/attachment.htm>