David Love wrote: > Any ideas as to what to do with this type of piano in order to get it on > a tripod dolly (institutional setting). Get some 7/16"x3" (or thereabouts) steel stock and make spanner platforms for each leg, attaching to the dolly leg in the center of each. A bolt threaded into the steel on each end of each spanner, pointing up, can go into the caster socket to corral the legs at a considerably lower cost than replacing the legs. It's amazing to me that leg replacement is even entertained, considering the list volume generated on reversibility of any minute deviation from the sacred ancestral morphology. Or is that just in the ultra holy artifacts? Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC