For rebuilders, this might be an "easy" and doable solution. But what do non-rebuilders do, short of calling in a rebuilder. But even at that, is this a problem that can be solved with a weaker spring? Wim -----Original Message----- From: Ron Nossaman <rnossaman at cox.net> To: pianotech at ptg.org Sent: Thu, Feb 11, 2010 11:13 am Subject: Re: [pianotech] Heavy Pedal Spring wimblees at aol.com wrote: > Steinway sustain pedals are notoriously heavy. But from what I've been > told, it's not the spring. It's the leverage, and there isn't much that > can be done about it. Nonsense, there's always something that can be done. Like Jim says, change the leverage. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100211/a59d5856/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC