The brace is fabulous! I've never seen a mover use one, though. --Cy-- Cy Shuster, RPT Albuquerque, NM www.shusterpiano.com On Feb 24, 2010, at 3:11 AM, Dean May wrote: > Well, you caught me, Greg. I took this picture a couple of years ago > for a different pianotech post and I was in a hurry so I didn’t put > any padding down. I didn’t actually put the piano all the way up, I > only positioned it to show the brace. Normally I would never do this > with no padding on the corner. With the padding there is no chance > crushing. And with the brace there is very little stress on the > lyre’s glue joints. Seems to me that should answer most of your > objections. > > Dean -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100224/11b2887c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC