I don't know about this...have we complained about Steinway?... '-] David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: reggaepass at aol.com To: pianotech at ptg.org Received: 2/24/2010 8:57:14 AM Subject: Re: [pianotech] Tuning pin torque??? >Hi James, >The brand may be irrelevant to the particular question you posed to the list, as you >stated, but I have to chime in in support of Marcel's question. This forum is a give >and get proposition. You've been given good, prompt responses to your question >about tuning pin torque, and those who have (hopefully) been of assistance to you >want to learn something specific from what you are going through. It's not like you >would be betraying the confidence of the manufacturer, if that is what's holding you >back from stating whose pianos you are struggling with. In today's era of (mostly) >mass-produced pianos, you can rest assured that you are not the only one having >this problem. It would just be more useful--and show you to be a full-fledged >participant in the valuable exchange that takes place on this list--for the rest of us >to know whose pianos we are talking about. Could you imagine all of the discussion >taking place about, say, Young Chang's expanding action bracket problem withOUT >knowing the manufacturer and vintage of the pianos under discussion? Wouldn't >that be of rather limited usefulness to all of the other list subscribers, to say the >least? >Alan Eder >-----Original Message----- >From: Williams, James <j.williams3 at tcu.edu> >To: 'pianotech at ptg.org' <pianotech at ptg.org> >Sent: Wed, Feb 24, 2010 8:11 am >Subject: Re: [pianotech] Tuning pin torque??? >The brand is irrelevant to the question. The question is ageneral question about pin >torque, not specific to one particular brand.Thanks for your inquiry. James. > > > >From:pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of MarcelCarey >Sent: Wednesday, February 24, 2010 10:07 AM >To: Pianotech List >Subject: Re: [pianotech] Tuning pin torque??? > >James, why do you avoid answering thequestion that have been asked at least 3 >times: What is the piano brand? >Is there a reason? >Marcel Carey >Toujoursbranché avec Téléphone WindowsMD. Renseignez-vous. > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC